- How deep should a 12 foot post be in the ground?
- Is 2 feet deep enough for fence posts?
- How long will pressure treated posts last in the ground?
- How do I keep my post from rotting in the ground?
- How long will 4×4 post last in the ground?
- Will pressure treated wood rot if buried?
- Why deck posts should not be set in concrete?
- How deep should a post be in the ground?
- How do you set a 6×6 post in the ground?
- How many bags of concrete do I need for a 6×6 post?
- Will wooden posts rot in concrete?
- Should I use 4×4 or 6×6 fence posts?
How deep should a 12 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level.
Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep..
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How long will pressure treated posts last in the ground?
3) A deck built with pressure treated wood will last a long time. Promotional literature promises lifelong performance for pressure treated wood. The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free.
How do I keep my post from rotting in the ground?
Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.
How long will 4×4 post last in the ground?
How long a PT 4X4 lasts in the ground is dependent on where you live, your environment. Basically, It won’t last more than half a decade. I’ve seen treated posts that were under a roof last 40 years. Untreated wood lasts one year, max.
Will pressure treated wood rot if buried?
Pressure-Treated Wood Makes the Grade Pressure-treated wood in contact with the ground needs the most protection, and will rot in just a few years if you use the wrong grade. … If your wood will touch the ground or be buried, you should get the highest grade you can, up to .
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. The photo on the left shows a post set in a bracket that has been mounted to the top of a footer. The photo on the right shows a post that has concrete poured around it, which can lead to a crack like you see here.
How deep should a post be in the ground?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you set a 6×6 post in the ground?
Step-By-Step Instructions:Dig the post hole, making it three times the width of the post and at a depth equal to 1/3 to 1⁄2 of the above-ground length of the post, plus 6″ (right). … Pour 6″ of gravel or crushed stone into the bottom of the hole. … Set the post in the hole.More items…
How many bags of concrete do I need for a 6×6 post?
Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.
Should I use 4×4 or 6×6 fence posts?
Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.