Quick Answer: What Does SDS Stand For On A Drill?

What does SDS mean for drills?

Slotted Drive SystemBut what is an SDS drill.

SDS stands for Slotted Drive Shaft or Slotted Drive System.

SDS bits are inserted into the chuck to make a rotary hammer or a hammer drill..

What’s the difference between SDS and SDS Max?

The most fundamental difference between SDS Plus and SDS Max lies in terms of size. SDS Plus bits are generally thinner and smaller than SDS Max bits. … Thinner SDS Plus is generally for lighter duty work–mostly for dr illing smaller holes; SDS Max is for heavier duty work–for drilling larger holes.

When would you use a SDS drill?

SDS drills are typically used for drilling through materials such as concrete, brickwork, block, steel and other hard materials. They can be used on DIY jobs and for jobs on site when a standard rotary drill or hammer drill just doesn’t have the capability to get the job done.

Can I use an SDS drill bit in a normal drill?

Yes, like every one has said, you can. Just make sure your lined up strait and are really tight on the chuck. If you feel it loosen then stop drilling strait away and swing off it. … You’re going to overheat the drill more than likely and it’s going to take significantly longer than an actual SDS drill.

What does 1 inch SDS mean?

This inch rating refers to the solid drilling diameter capacity or basic power of the drill, not a different size SDS-Plus shanks. All SDS-Plus shanks are the same, just as all SDS-Max and Spline are the same size.

What does SDS Max stand for?

SDS is simply the bit retention system — or how the bit is held in the drill. There is some debate as to what the “SDS” acronym stands for. The original German interpretation was “Steck-Dreh-Sitz” meaning Insert-Twist-Stay. As the bit evolved, it has come to be known as a Slotted Drive System or Slotted Drive Shaft.

What does HSS mean in drill bits?

High-speed steelHigh-speed steel (HSS) High-speed steel is the most commonly used alloy steel for metal drill bits.

What is the difference between an SDS drill and a hammer drill?

SDS Rotary Hammers are similar to Hammer Drills in that they also pound the drill bit in and out while it’s spinning. They use a piston mechanism instead of a special clutch enabling them to deliver a much more powerful hammer blow than traditional Hammer Drills – they are able to drill larger holes much faster.

What are SDS drill bits used for?

SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.

What is the difference between a rotary drill and a hammer drill?

Both tools pound the bit while it spins, pulverizing concrete, but the two differ in the mechanisms that do the actual pounding. In a rotary hammer, a cylinder of air is compressed by a piston, which in turn beats the bit. In a hammer drill, two ribbed metal discs click in and out against one another, causing impact.

Can you drill wood with SDS drill?

As with normal percussion drills SDS drills can be used to drill holes into wood, metal, and plastic, but they stand out as the king of masonry. The rotary mode can be used to drill or cut into soft materials, like wood, plastic, or soft concrete block.

What is the best SDS drill to buy?

Check out these great deals on Cordless SDS Plus Drills at ToolstopDewalt DCH614X2 54V XR Flexvolt Brushless SDS Max Hammer 45mm (2 x 9.0Ah Batteries) … Bosch GBH 18V-21 (0611911100) 18V Brushless SDS Plus Rotary Hammer (Body Only) … Makita DHR242Z 18V Brushless 3-Mode SDS Plus Rotary Hammer Drill 24mm (Body Only)More items…•

Can a hammer drill be used as a normal drill?

Conclusions. Ultimately, while a hammer drill certainly can be used as a regular drill by putting it in “drill” mode, it has some limitations and a complete tool inventory should ideally include both. However, if you’re only going to buy one drill, a hammer drill is the more versatile of the two.

Are all SDS drill bits the same?

The shanks of SDS and SDS-Plus drill bits have a diameter of 10 mm. and are interchangeable. I.e., you can put either type of bit in either type of tool and they will fit securely. On the other hand SDS-Max, which have a 18 mm.

What is the best drill bit for boring a hole into concrete?

1.1. A masonry or concrete drill bit is the preferred option for drilling very hard materials like concrete, natural stone or granite. It has a carbide tip and is usually made from tool/carbon steel.

What are the different SDS sizes?

There are three standard sizes of SDS: SDS-plus (or SDSplus or SDS+), SDS-Top and SDS-max.